wood filament 1.75mm 3mm filament
Material: PLA ABS HIPS POM PC PETG WOOD NYLON...
Colours: more than 20 colors
Filament diameter: 3mm or 1.75mm
Diameter variation: +/- 0.03mm
Packing: 1kg/ spool/ vacuum pack (with desiccant) /box
Filament diameter: 3mm and 1.75mm
Packing: 1kg/ spool/ vacuum pack (with desiccant) /box, gross
weight: 1.4kg, 12 spools/carton, gross weight 16.8kg, meas:
Plastic spool size: 20*20*9cm
1, Makingtop technology company professional development of wood
supplies, real wood wood printing supplies, printing products
equivalent wood effect, wood exudes taste when printing, like wood,
nails, drilled, carved. Our Wood supplies are made with native wood
flour a new composite material, anti-corrosion, acid, no insects,
no moldy, non-toxic characteristics, not on the market in general
comparable wood supplies.
2, the real is not blocking the nozzle of Wood supplies, due to the
optimized formulation and unique compared to other wood supplies
good mobility. In order to make the best print quality, we
recommend the printer temperature set at 200-230 ℃, hot beds can be
3, printing works well, there is wood grain, print the
I . Before produce extruding filament ,we will dry ABS and PLA for
a enough time (3-5 hours).
II. Mix with colors masterbatch or colors powder, all which
.certified with ROHS.
75III.Adjust temperature and dragging rate , make filament diameter
range at 1.72-1.76mm/2.85-2.95mm, roundness +/-0.03mm, each spool
net weight 1kg+/-0.01kg
IV we put all filament spool in shelf, different kind in different
shelf, all categories arrange orderly.
2.Productiong quality control
I. we have diameter laser detect kits to control extruding rate on
line, when diameter smaller or higher than accept range, the laser
detect kits will adjust the extruding rate higher or smaller to
make diameter range at acceptable.
II.keep each record filament samples sent to customers, build a
tracking able document.
III.when the filament put on shelf longer than half a year, we will
dry the filament again.
3.About waste & recycle
Much time you will find some black filament is too brittle, that
added and mixed with some recycle and scrap after produced.
We haven’t produced with scrap outlet, rework&recycle material,
or dispose, but for quality assurance purpose.
We put each filament /spool on seal PE bag with desiccant , then
smaller carton, then out big box
We also have vacuum heated bag to replace of PE bag, make better
5.Research and developing
we have engineers that specialty in color formulation ,plastic
modification, packaging, quality control ,producing control, we can
do according to your requirements .